Lower the print carriage until it latches into place, and close the lid. Save your design to the Lobo system, turn off the system, and make sure your SD card is properly inserted. Don’t show me this message again. If you needed to correct the ribbon loading, try printing your label again. Go to the Options tab, and look at the Printer Options section. Driver Wizard Completed Successfully By pressing ‘print’ button you will print only current page.
|Date Added:||21 June 2012|
|File Size:||67.72 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Simply restart the computer to correct this. We are here to help. To maintain optimal performance, the DuraLabel printer should be cleaned after every two rolls of supply. Any jobs in the queue will be re-sent, and may print out correctly.
DuraLabel PS Information | Graphic Products
How-To Videos Watch short how-to videos on printer operation, creating compliant arc flash, HazCom labels and signs, and so much more! Press the feed button, right next to the light. Make sure dualabel tape is fed through the two guides at the cartridge exit. If you are still unable to print after restarting your computer, please contact our support team for help.
Additional freedom Need independence? Redefine your visual communication program with LabelForge and DuraSuite labeling software.
printef Turn off the printer using the power switch in the back, near the black power cord. Contact Have a question not answered yet? Under Advancedclick the Driver button to open the detailed controls.
Check the Supply Loading First, check to make sure that the supplies are lined up prniter inside the printer. If the cartridge seems to be in place, but the locking knob will not turn, the cartridge may need more pressure to fit down correctly. Turn off the printer again, wait about five seconds, duralabrl and hold the button, and turn the system back on. Wait about five seconds, and turn the printer on again.
After passing the guides, the supply should reach forward over the black rubber roller near the front of the printer.
DURALABEL USER MANUAL Pdf Download.
This problem usually comes up with labels that are more than thirty inches long, printed from older Toro systems. Call Us Toll Free from the U. Click the Calibrate button to have Toro feed some of the label stock through and re-adjust its internal sensors.
Page 41 Finish if the information is correct. Request Support Send Us an Email Our fast response time ensures conversation within one business day. The supply type selected here needs to match the supply type that you are using: The print head, cutter mechanism and platen roller should be cleaned with alcohol swabs to remove buildup of adhesive, dust and other substances.
If you needed to correct the supply loading, close up the printer and try printing your label again.
The roll of label stock should be centered on its spindle, and the material should unroll from the printr of the roll. Your DuraLabel is now cleaned and ready to use. Go to the Stock tab, and look at the Method drop-down menu. Turn off the printer, and wait about five seconds.
DuraLabel 9000 Information
A Driver Wizard Completed Successfully window appears, confirming the printer driver installaton was completed successfully. If the same thing happens again, continue to the next step. If you use Windows 8 or Windows 8. Then, set the Print Speed to 2 inches per second, and adjust the Darkness slider to near the middle of its range. Get your message across with the DuraLabel It will feed out some label stock during this process; once it stops, you can safely open the printer, unlatch the print head, and roll the label stock back in.
Often, this is the result of a battery problem.